Shopping Cart

You do not have any products in your shopping cart yet.


Welcome back !

eMail Address:

New Products

Rane XP2016a Expander for MP2016a Mixer

Rane XP2016a Expander for MP2016a Mixer

$461.99

Currencies

DBX 2031 Single 31-Band Graphic Equalizer

DBX 2031 Single 31-Band Graphic Equalizer
$295.00
Manufacturer's Code:2031

In Stock - This product usually ships next day.

A serious discount available for this item - details can be found at checkout.

It's amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus® Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!

  • Revolutionary instant encode/decode Type III Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB.

  • Patent-pending PeakPlusª Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal.

  • An extremely high quality EQ, patent-pending TYPE III Noise Reduction, and the elegant new PeakPlusª Limiter all in one great sounding box.

  • Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available.

  • Status LEDs offer visual feedback for all settings on the front panel.

 

 INPUT

Connectors:

 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced 40k ohm, unbalanced 20k ohm

Max Input Level:

>+21dBu balanced or unbalanced

CMRR:

>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors:

 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type:

Impedance-balanaced/unbalanced, RF filtered

Impedance:

Balanced 200 ohm, unbalanced 100 ohm

Max Output Level:

 >+21dBu balanced/unbalanced into 2k or greater
 >+18dBm balanced/unbalanced (into 600)
 

SYSTEM PERFORMANCE

Bandwidth:

20Hz to 20kHz, +/-0.5dB

Frequency Response:

<10Hz to >50kHz, +0.5/-3dB

Dynamic Range:

109dB 115dB

Noise Reduction In:

 (+/-6 and +/-15dB range):

Signal-to-Noise:

 >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >120dB, unweighted

Noise Reduction Out:

 (+/-6dB range):

Signal-to-Noise:

 >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

Dynamic Range:

 >120dB, unweighted

Noise Reduction Out:

 (+/-15dB range):

Signal-to-Noise:

 >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >108dB, unweighted

THD + Noise:

<0.04%, 0.02% typical at +4dBu, 1kHz

Noise Reduction:

Up to 20dB of dynamic broadband noise reduction

FUNCTION SWITCHES

Type III NR:

Activates dbx® Type III® Noise Reduction

EQ Bypass:

Bypasses the Graphic Equalizer section in the signal path

Low Cut (recessed):

Activates the 40Hz 18dB/octave Bessel high-pass filter

Range (recessed):

Selects either +/- 6dB or +/-15dB slider boost/cut range

INDICATORS

Output Level Meter:

 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Gain Reduction Meter:

4-LED bar graph (all Red) at 0, 3, 6, and 10dB

Type III® NR Active:

Yellow LED

EQ Bypass:

Red LED

Clip:

Red LEDLow cut Active:

Low Cut Active:

Red LED

+/-6dB range:

Yellow LED

+/-15dB range:

Red LED

POWER SUPPLY

Operating Voltage:

100VAC 50/60Hz, 120VAC 60Hz
230VAC 50/60Hz

Power consumption:

12W

Main Connection:

IEC receptacle

PHYSICAL

Dimensions:

3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)

Weight:

8.5 lbs. (3.9 kg)

Shipping Weight:

9.5 lbs. (4.3 kg)

Note: Specifications subject to change without notice.
 

Additional Product Information:

Owner's Manual [1.18 megs] Spec Sheet [267K]

 

 



 

 
Copyright © 2008 Digilake.com. All rights reserved.