Shopping Cart

You do not have any products in your shopping cart yet.


Welcome back !

eMail Address:

New Products

Rane RPM 44 Programmable Multiprocessor

Rane RPM 44 Programmable Multiprocessor

$1,385.99

Currencies

DBX iEQ-31 Dual 31-Band Graphic EQ/Limiter with Type V? NR and AFS?

DBX iEQ-31 Dual 31-Band Graphic EQ/Limiter with Type V? NR and AFS?
$430.95
Manufacturer's Code:IEQ31

In Stock - This product usually ships next day.

A serious discount available for this item - details can be found at checkout.

With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx® legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional's choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.

. Advanced Feedback Suppression (AFS™)

. Type V™ Noise Reduction

. PeakStopPlus™ Limiting

. 1/3-octave Constant Q frequency bands

. Switchable boost/cut ranges of ±6 or ±15dB

. 18 dB per octave 40Hz low-cut filter

. ±12dB input gain range

. XLR, TRS and Euroblock Inputs and Outputs

. Internal Toroidal Transformer

. Dyanmic range of greater than 113dB

. User Power Up Features

. Relay Bypass for Power Failure System Protection

INPUT

Connectors:

1/4" TRS, female XLR (pin 2 hot), and Euroblock

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced 40k ohm, unbalanced 20k ohm

Max Input Level:

>+22dBu balanced or unbalanced

CMRR:

>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors:

1/4" TRS, male XLR (pin 2 hot), and Euroblock

Type:

Balanaced/unbalanced, RF filtered

Impedance:

Balanced >120 ohm, unbalanced >60 ohm

Max Output Level:

 >+20dBu balanced/unbalanced into 2k ohm or greater
 

SYSTEM PERFORMANCE

Frequency Response:

20Hz to 20kHz, +0.5/-0.25dB

Dynamic Range:

>113dB, "A" weighted

THD+Noise:

<0.003%, typical at +4dBu, 1kHz

Interchannel Crosstalk:

<-80dB, 20Hz to 20kHz

Noise Reduction:

Up to 10dB of dynamic broadband noise reduction

Digital Resolution:

24 bits

Sample Frequency:

48khz

Latency:

2msec

POWER SUPPLY

Operating Voltage:

120VAC 60Hz, 220-240VAC 50/60Hz

Power consumption:

17W

Main Connection:

IEC receptacle

Dimensions:

5.25" H x 19" W x 7.9" D

Note: Specifications subject to change without notice.

           
       
Owner's Manual [1.21 megs] Cut Sheet [117K]
 



 

 
Copyright © 2008 Digilake.com. All rights reserved.